T-DIE Head for Extruder

 

The head of midwives offered by our company is in two series:

First series
These are heads that are produced for the production of PP.PS.PE and ABS sheets in the thickness range of 0.2 to 2 mm and also from 1 mm to 8 mm. These heads are designed and manufactured by the company inside the workshop.

 

the second series
Heads that are for the production of specialized sheets such as PET.PVC and PC in special thicknesses or in the form of hollow sheets that these heads are ordered and purchased from head manufacturers from Turkey, Korea, China or Taiwan.

Imported head dies for use in the production equipment of this company or as a single order of the buyer by this company, purchased and provided by foreign companies party to the contract.

Head T-DIE Made by this company for the production of sheets and rolls

PP.PS.PE -> 0.2 – 2 mm thick and 30 – 160 cm wide

PP.PS.PE and ABS -> 1 – 8 mm thick and 50 – 300 cm wide

 

T-DIE head 90 cm wide PP.PS sheet

 

 

In the construction of the die head for the body, hot-alloy steel is used, which has the least expansion at the wing temperature, so that there is no problem for rotating the thickness adjustment screws and the head die tolerance of the sheet.

After finishing the machining steps, the whole body of the head die is completely grinded on the outside and inside of the head die, and in the last stage, all sections of the head die that are in contact with polymer materials are hardened with chrome plating and polished with high accuracy.

 

 

Sample hard chrome plating and polishing inside T-DIE head die

 

 

Imported T-DIE head

 

 

 

 

 

 

 

 

Familiarity with the internal map of the head die for different materials and thicknesses

Single layer head with screw load for 45 and 90 degree cylinders

 

 

 

 

Simple single layer head dye

 

 

 

Dai head with two material inputs to produce 2-layer sheet

 

 

 

 

 

 

 

 

It is necessary to explain and note that among the manufacturers of the device in Iran, only 2 or 3 units have a license and exploitation license for industrial and mining structures, which Behsaz Polymer Industrial Group has been operating since 2000 under the exploitation license of the Industrial Organization.

And also, unfortunately, most advertisers on the Internet are intermediaries as manufacturers of disposable tableware and do not have any license from the Department of Industry and even choose the name of the company or brand to introduce their product is not registered in any office or organization.

 

 

Any copying of the contents of the site without including the source will be prosecuted.

We hope the above content was helpful

Behsaz Polymer Industrial Group