Cylinders and Rollers

 

 

 

Cylinder

Cylinder is the part of the polymer sheet production line in which the sheet is rolled. It usually has 3 main rollers, the sheet is rolled between the 2 main rollers and then by passing and contacting the circumferential distance of the third roller, which has low heat by its internal cooling liquid, it causes the production sheet to cool completely. The Cylinder is designed and manufactured according to the type of sheet materials as well as the thickness of the sheet in 3 positions: horizontal (horizontal), vertical (vertical) and angled (45 or 60 degrees).

In principle, each roller must have a separate motor, gearbox and inverter to change the electronic speed to create rotational force. Of course, in many Cylinders, some manufacturers use the same engine for 3 rollers. The length of rollers used to produce various polymer sheets is mostly between 60 and 120 cm due to the high consumption of this size. Of course, nowadays in European countries, machines with a roller length of 6 meters are also made for the production of special thick sheets.

This production unit mainly produces calendars that are used in the sheet production line in a size that can be used in the production of disposable tableware.

Types of Cylinders in different angles and widths for the production of plant sheets. PVC. PS. ABS. PP

Cylinders made by this unit with a roller width of 50 to 3000 cm and a roller diameter of 15 to 90 cm can be provided. The minimum tolerance is about 10 to 15 microns in 1 meter width for 100 to 150 micron sheets

 

 

Cylinder width 250 cm with roller diameter 50 cm for rolling PP.PE.PS.ABS sheet thickness 1 to 7 mm

 

 

 

 

 

Cylinder 90 cm wide 45 ° with rollers 30 cm diameter for PP.PS sheet 0.2 to 2 mm thick

 

 

 

 

 

 

 

Cylinder on 2 to 8 mm flat sheet production line

 

 

 

 

Cylinder width 80 cm 45 degrees with rollers diameter 30 cm for PP.PS sheet thickness 0.2 to 2 mm

 

 

 

 

Cylinder 85 cm wide 45 ° with rollers 30 cm diameter for PP.PS sheet thickness 0.2 to 2 mm

 

 

 

 

 

 

It is necessary to explain and note that among the manufacturers of the device in Iran, only 2 or 3 units have a license and exploitation license for industrial and mining structures, which Behsaz Polymer Industrial Group has been operating since 2000 under the exploitation license of the Industrial Organization.

And also, unfortunately, most advertisers on the Internet are intermediaries as manufacturers of disposable tableware and do not have any license from the Department of Industry and even choose the name of the company or brand to introduce their product is not registered in any office or organization.

 

 

 

 

Any copying of the contents of the site without including the source will be prosecuted.

We hope the above content was helpful

Behsaz Polymer Industrial Group